活断层活动度和危险度评定     

李起彤 《华南地震》1992,12(3):63-68

研究活断层活动度和危险度的定量评定标准和方法,对活断层潜在地震危险性评估具有重要意义,在地震预报和工程地震研究中有广泛应用。作者提出了对活断层活动度和危险度概念含义的看法及其划分标准和评定方法;主张用下次大震迫近时间作为评定活断层危险度的标准。  相似文献   

蒲江—新津—成都—德阳断裂带——成都平原内一条代表性弱活动地震带的地震地质特征     

钱洪  唐荣昌  马声浩 《四川地震》1992,(4)

活断层是地震的潜在策源地。然而不同的活断层上地震潜在能力有极大的差别。客观地评价活断层上地震潜在能力不仅是地震预报研究的需要,对国民经济建设的布局和抗震决策也极为重要。在这个意义上,对弱活动性断裂的研究与对强活动性断裂的研究具有同样的重要性。本文以弱活动的蒲江—新津—成都—德阳断裂带为例,讨论了该断裂的晚第四纪活动性,断裂带的地质结构以及断裂的切割深度等因素对该断裂带地震潜在能力的可能影响。  相似文献   

柔性断层错动产物的微观研究方法初探   总被引：2，自引：0，他引：2  

姚大全  汤有标 《地震研究》1992,15(1):63-69

柔性断层错动产物一般尚未固结,难以对其进行定向取样,固化和磨制薄片,笔者经过长期努力提出解决这个问题的方法并将其应用于郯—庐断裂带赤山段晚更新世以来活动性的研究中。笔者按总结出的方法定向采取断层泥,对其固化并磨制定向薄片,在镜下仔细观测,发现众多变形现象和由其反映的运动学和动力学方面的重要信息。属脆性变形的有:长英质矿物颗粒被错移并形成棋盘格式构造,脆—塑或塑性变形发生在粘土和云母类的矿物中,尤其是“帚”状扭折和先扭后错现象在云母中非常普遍。恢复薄片的自然产状后,宏微观构造具统一性。据变形产物赋存的地质时代,它们应是断裂晚更新世以来活动的微观证据。文中笔者除系统介绍了柔性断层产物的采样、固结、磨片和应用此种技术的实例外,还探讨了显微构造分析在活断层研究中应有的地位和作用。  相似文献   

京西黄庄—高丽营断层西段晚更新世末的一次粘滑性活动   总被引：1，自引：0，他引：1  

陈国星  郑传贝 《地震》1994,(3):23-28

本文根据新近大比例尺地质图和探槽开控的结果，认为断层西段（仅在芦井至晓幼营间）晚更新世以来仍有明显活动，这种活动以正段倾滑运动为主，但兼具右旋走滑分量；并且在距今约２．４－２．１万年期间有过一次粘滑性活动，其垂直错距为０．９１．０ｍ；该段断层潜在有发生６－６．５级地震的可能性。  相似文献   

辽南核电站厂址区断层的评价问题          下载免费PDF全文

李愿军 《地震工程学报》1994,16(3):47-53

作者通过对核安全法规的学习和前人对辽南核电站厂址区断层的调查，并结合对断层实际踏勘，认为厂址区附近的东岗断层属于现行法规（ＨＡＦ０１０１）中规定的能动断层。但是，仅此一点并不能构成对推荐厂址的威胁，因为断层距厂址直线距离约４ｋｍ，断层的地表或近地表错动不会直接影响到核反应堆的安全。  相似文献   

1932年昌马地震构造力学特征探讨     

郭万武  张范民 《内陆地震》1994,8(1):75-80

１９３２年昌马地震构造力学特征探讨郭万武，张范民，邢成起，温增平（国家地震局兰州地震研究所，兰州）ＤＩＳＣＵＳＳＩＯＮＯＮＴＨＥＴＥＣＴＯＮＯＭＥＣＨＡＮＩＣＦＥＡＴＵＲＥＳＯＦ１９３２ＣＨＡＮＧＭＡＥＡＲＴＨＱＵＡＫＥＭｓ７．６￥ＧｕｏＷａｎｗｕ；...  相似文献   

关于准噶尔西界山带地震活动性研讨     

李凡德 《内陆地震》1994,8(3):241-246

根据地形、地貌、地震地质特征以及地震活动情况研究了准噶尔西界山带的地震活动性。认为１９９０年６月１４日原苏联斋桑７．３级地震和同年８月３日６．８级地震应属准噶尔西界山带地震。显然，准噶尔西界山带范围内的地震烈度区划（１９９０）应该调整。  相似文献   

桐城桐山－庐江大化下古生界飞来峰及其地质意义     

汪来利  刘贻灿  石永红 《安徽地质》1994,(Z1)

桐城桐山－庐江大化的飞来峰位于早白垩世杨湾组（Ｋ＿１ｙ）弱变形的紫红色陆相碎屑岩之上，由下古生界的硅化粗晶灰岩，白云质灰岩及硅质岩组成，岩层强烈碎裂。其中伴生的张裂隙及剪切石香肠指示岩层由南东向北西逆冲。这一飞来峰的形成与郊庐断裂南段平移作用产生的次级逆冲有关。是由此产生的推覆体差异剥蚀的结果，这种次级逆冲推覆作用发生在扬子板块前陆褶冲带的变形之后。  相似文献   

Offset dependent amplitudes: Fault curvature effects and dip move-out corrections     

I. Lerche 《Pure and Applied Geophysics》1994,143(4):537-562

Equations have been presented previously which predict that reflector curvature can affect significantly seismic reflection amplitudes at both zero and nonzero source-receiver offsets. Here the fact that faults are generally concave-upward is used to examine the curvature effect for compaction-driven faults which the sediments have both exponential and logarithmic porosity decreases with increasing depth.The curvature effect is generally larger over upwardly concave reflectors where amplitudes can either increase with offset (exposed focus) or decrease with offset (buried focus). The magnitude of the effect depends on the ratio between the depth to the structure and the radius of curvature of the structure. A phase change of 90° also occurs at a critical offset in the case of an exposed focus concave-upward reflector, with decreasing amplitude at offsets larger than the critical value. Dip move-out (DMO) dominantly removes the amplitude variation with offset due to curvature. These results suggest that when looking for amplitude variations with offset in a fault prospect, DMO should be applied as a preprocessing step. Compaction-driven faults have an exposed focus and, for an exponential variation of porosity with depth, there is a maximum curvature effect at a depth roughly the same as the scaling depth for the porosity. Logarithmic porosity with depth variations suggest a continued increase in the curvature effect of faults with increasing depth, to a maximum amplitude increase of about 35% relative to a plane interface.  相似文献   

The frictional behavior of lizardite and antigorite serpentinites: Experiments,constitutive models,and implications for natural faults   总被引：2，自引：0，他引：2  

Linda A. Reinen  John D. Weeks  Terry E. Tullis 《Pure and Applied Geophysics》1994,143(1-3):317-358

Laboratory studies of the frictional behavior of rocks can provide important information about the strength and sliding stability of natural faults. We have conducted friction experiments on antigorite and lizardite serpentinites, rocks common to both continental and oceanic crustal faults. We conducted both velocity-step tests and timed-hold tests on bare surfaces and gouge layers of serpentinite at room temperature. We find that the coefficient of friction of lizardite serpentinite is quite low (0.15–0.35) and could explain the apparent low stresses observed on crustal transform faults, while that of antigorite serpentinite is comparable to other crustal rocks (0.50–0.85). The frictional behavior of both types of serpentinite is well described by a two-mechanism model combining state-variable-dominated behavior at high slip velocities and flow-dominated behavior at low velocities. The two-mechanism model is supported by data from velocity-step tests and timed-hold tests. The low velocity behavior of serpentinite is strongly rate strengthening and should result in stable fault creep on natural faults containing either antigorite or lizardite serpentinite.  相似文献